The pump rotates in both ways to control the up-and-down movement of the table. This is the secret of minute feeding! (0.001mm) The volume, pressure and direction of oil are automatically controlled by the combination of both-way pump and AC servomotor. At the same time, its energy-saving and environment-friendly design reduces energy loss and waste of operating oil as much as possible. The pressure of the upper table can be separately controlled. The upper table can control the tilt by the individual cylinders. (50% of offset load) The hybrid crowning cylinders can adjust the compensation during the bending process. New back gauge with high speed and high precision L Axis Speed (Back and Forth) Feed Rate: 30m/min Y Axis Speed (Side to Side) Feed Rate: 60m/min (Twice as fast as conventional machines) Z Axis Speed (Up and Down) Feed Rate: 10m/min (About three times as fast as 3m/min of conventional machines) L Axis Stroke 700mm/27.56inch (Repeat accuracy of plus or minus 0.002mm/0.000079inch) (HDS-5020NT/8025NT/1303NT) Z Axis Stroke -10 to 240mm/-0.39 to 9.45inch AMNC/PC:Production of New Data and Select to Repeat Data • Up to 600 files can be loaded, also the time required for reading is significantly shortened. • The files to call up can be narrowed down by specifying servers, folders, product names, parts names and machine names. • The functions to retrieve plate thickness or dates of production are enhanced. • The target angles, dimensions, reference V width, and internal R can be displayed. • The plate thickness, materials, internal R, angles, reference V width can be identified on the Tool Selection Screen. Networking. It is the Trend of Design and Manufacturing in the 21st Century The bend CAM is automatically generated from 3D data, and the data are received and operated by the AMNC/PC. That is the trend of design and manufacturing in 21st century. AMADA’s new bending network allows the design and production sides to share their data, and work hand-in-hand with each other to weather the hard times. That is the most effective system to cope surely with changes in types and quantities of products, and maintain high productivity. Also, the NC data of NCT & Laser are produced.	• HDS Series • FBDIII Series • RG Series • HFE Series • Bending Automation - ASTRO - TBZ