The AE series Turret Punch Press is a step forward on the AC series. Parts are produced faster! Cost is reduced!
Sample Processing by AE series
Turret Punch Press AE Series Top page
Sample Processing by AE series
AE Series Automation Example
AE Series Specification
Eliminate slug
Slug pull is often a problem when punching at high speeds, especially with small diameter holes. This nuisance is virtually eliminated through the use of the power vacuum die and air blow tool systems with Amada AE-NT series turrets. A powerful stream of air inside the die helps pull slugs safely downward, greatly reducing the chance of shotdowns, scraped parts and broke punches. In addition, punch penetration can be reduced, thus increasing total hits per minute, while increaing tooling life
Part size: 905X905mm Material thickness: 1.0mm Material type: GALV
Number of parts made: 1 per 905X905mm sheet Number of tools used: 3 Number of hits: 6,685
* AC Video
High-speed marking
using the marking tool at speeds of up to 900min-1, reduce secondary operation time by adding part names, part numbers, bend lines, weld locations and other information.
Part size: 150X120mm Material thickness: 1.0mm Material type: SECC
Number of parts made: 1 Number of tools used: 20 Number of hits: 1,447hits (with marking)
* AC Video
High-speed forming
Parts can be formed to desired shapes and dimensions. Previously, punching and forming often had to take place in separate operations. Now, offset bends, extrusions, ribs and other forms can be added at high speeds, using tools in the auto-index stations.
* AC Video
High-speed deburring
High-speed deburring reduces processing time dramaticallyReduce costly an time-consuming, post-punch deburring by doing the work "in the sheet." Using the deburring tool, the burrs raised during are flattened-out, helping to streamline manufacturing processes.
- Home /
- Contact /
- Privacy Policy /
- Site map